How do you clean a pure sheepskin rug?

Sheepskin rugs are a luxurious addition to any home, providing warmth, softness, and comfort underfoot. They are made from natural materials and are often quite durable, but they do require special care and attention to keep them clean and looking their best. Cleaning a pure sheepskin rug is a delicate process that should be done carefully and with the right materials to avoid damaging the rug. Here are the steps you can follow to clean a pure sheepskin rug:

1. Shake the rug outdoors

The first step in cleaning a sheepskin rug is to take it outside and give it a good shake to remove any loose dirt or debris. This will also help to loosen any dirt or dust that has become embedded in the fibers of the rug. You can also use a soft-bristled brush to gently brush the rug, taking care not to pull too hard on the fibers.

2. Vacuum the rug

After shaking the rug, you should vacuum it thoroughly to remove any remaining dirt, dust or debris. Use a vacuum cleaner with a soft-bristled attachment or a handheld vacuum to avoid damaging the fibers of the rug. Vacuum the rug in the direction of the fibers, using short strokes to avoid pulling on the fibers.

3. Spot-clean any stains

If there are any stains or spills on the rug, you should spot-clean them using mild detergent and warm water. Mix the detergent with warm water in a spray bottle and apply it to the stained area. Use a soft-bristled brush to gently rub the solution into the fibers, taking care not to overwet the rug. Then, use a clean cloth to blot the area and remove as much of the solution as possible.

4. Wash the rug

To wash the sheepskin rug, you will need a mild detergent specifically designed for washing sheepskin, warm water, and a bathtub or large basin. Fill the bathtub or basin with enough warm water to submerge the rug, then add the sheepskin detergent and mix well. Gently place the rug into the water and use your hands to massage the detergent into the fibers, taking care not to agitate the rug too much. Let the rug soak in the water for 10-15 minutes.

5. Rinse the rug

After soaking the rug, drain the water from the bathtub or basin and refill it with clean, warm water. Gently place the rug into the water and use your hands to rinse the detergent out of the fibers. Continue rinsing until the water runs clear and there is no more detergent in the rug.

6. Dry the rug

Once the rug has been thoroughly rinsed, gently squeeze out any excess water and then lay the rug flat on a clean, dry towel. Roll up the rug in the towel to remove any remaining moisture. You may need to repeat this step with a fresh towel if the first one becomes too wet. Then, lay the rug flat in a cool, dry place, away from direct sunlight or heat sources. You should avoid using a hair dryer or other heat source to dry the rug, as this can damage the fibers.

7. Brush the rug

After the rug is completely dry, use a soft-bristled brush to gently brush the fibers in the direction of the nap. This will help to restore the natural softness and texture of the rug.

In conclusion, cleaning a pure sheepskin rug requires patience and care. By following the above steps, you can safely clean your rug and keep it looking beautiful for years to come. Remember to always use a mild detergent specifically designed for sheepskin, avoid using heat sources to dry the rug, and take care not to over-wet or agitate the fibers during the cleaning process.

Overall, washing a sheepskin rug can be a delicate process, and it’s important to follow the care instructions carefully to avoid damaging the rug. If you’re unsure about washing your sheepskin rug, it’s best to seek professional sheepskin cleaning services to ensure that it is properly cared for.

ABC Decorative Rugs offers sheepskin rug cleaning in San Francisco Bay Area and for customers, convenience offers pickup & drop off service.